553 lines
27 KiB
Plaintext
553 lines
27 KiB
Plaintext
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 37487,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0x1f38430: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> save_restore: Can't connect to all status PV(s)
|
||
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 34983,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0xdc94f8: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> save_restore: Can't connect to all status PV(s)
|
||
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 35941,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0xafd3d8: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> save_restore: Can't connect to all status PV(s)
|
||
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 41945,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Starting Mode: NonStarting
|
||
sevr=info Starting Mode: Starting1
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Stopping Mode: Stopping1
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Cleaning Mode: Cleaning1 In
|
||
sevr=info Shoting Mode: NonShoting
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0x7803b8: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> sevr=info Stopping Mode: NonStopping
|
||
sevr=info Starting Mode: NonStarting
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Starting Mode: NonStarting
|
||
save_restore: Can't connect to all status PV(s)
|
||
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 39343,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Pulse Sequence entrysevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Shoting Mode: NonShoting
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0x1e73478: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> save_restore: Can't connect to all status PV(s)
|
||
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 44303,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Starting Mode: NonStarting
|
||
sevr=info Starting Mode: Starting1
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Cleaning Mode: Cleaning1 In
|
||
sevr=info Shoting Mode: NonShoting
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0x1f704e0: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> sevr=info Stopping Mode: NonStopping
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Stopping Mode: NonStopping
|
||
save_restore: Can't connect to all status PV(s)
|
||
Starting iocInit
|
||
reboot_restore: entry for file 'iocISTTOKrpi.sav'
|
||
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
|
||
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
|
||
reboot_restore: done with file 'iocISTTOKrpi.sav'
|
||
|
||
cas warning: Configured TCP port was unavailable.
|
||
cas warning: Using dynamically assigned TCP port 41859,
|
||
cas warning: but now two or more servers share the same UDP port.
|
||
cas warning: Depending on your IP kernel this server may not be
|
||
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
|
||
iocRun: All initialization complete
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Pulse Sequence entry
|
||
sevr=info Stopping Mode: NonStopping
|
||
sevr=info Cleaning Mode: NonCleaning
|
||
sevr=info Shoting Mode: NonShoting
|
||
#!../../bin/linux-arm/ISTTOKrpi
|
||
## You may have to change ISTTOKrpi to something else
|
||
## everywhere it appears in this file
|
||
< envPaths
|
||
epicsEnvSet("IOC","iocISTTOKrpi")
|
||
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
|
||
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
|
||
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
|
||
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
|
||
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
|
||
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
|
||
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
|
||
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
|
||
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
|
||
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
|
||
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
||
cd "/opt/epics/iocs/ISTTOKrpi"
|
||
## Register all support components
|
||
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
||
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
||
## Load I2C drivers
|
||
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
||
## Load Serial drivers
|
||
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
||
#asynSetOption("RS0", 0, "baud", "9600")
|
||
#asynSetOption("RS0", 0, "bits", "8")
|
||
#asynSetOption("RS0", 0, "parity", "none")
|
||
#asynSetOption("RS0", 0, "stop", "1")
|
||
#asynSetOption("RS0", 0, "clocal", "Y")
|
||
#asynSetOption("RS0", 0, "crtscts", "N")
|
||
## Load record instances
|
||
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
||
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
||
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
|
||
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
|
||
## Run this to trace the stages of iocInit
|
||
#traceIocInit
|
||
save_restoreSet_status_prefix("iocISTTOKrpi:")
|
||
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
|
||
save_restoreSet_NumSeqFiles(3)
|
||
save_restoreSet_SeqPeriodInSeconds(600)
|
||
set_pass1_restoreFile("iocISTTOKrpi.sav")
|
||
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
|
||
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
|
||
iocInit
|
||
############################################################################
|
||
## EPICS R3.15.5
|
||
## EPICS Base built Jan 11 2018
|
||
############################################################################
|
||
#asInit
|
||
# Create request file and start periodic 'save’
|
||
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
|
||
create_monitor_set("iocISTTOKrpi.req", 30)
|
||
## Start any sequence programs
|
||
seq IsttokSeqExec, "unit=ISTTOK"
|
||
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
|
||
Spawning sequencer program "IsttokSeqExec", thread 0x9df470: "IsttokSeqExec"
|
||
IsttokSeqExec[0]: all channels connected & received 1st monitor
|
||
epics> save_restore: Can't connect to all status PV(s)
|