#!../../bin/linux-arm/ISTTOKrpi
|
|
## You may have to change ISTTOKrpi to something else
|
## everywhere it appears in this file
|
|
< envPaths
|
epicsEnvSet( "STREAM_PROTOCOL_PATH", "$(TOP)/protocols" )
|
epicsEnvSet( "SAVE_DIR", "$(TOP)/iocBoot/$(IOC)" )
|
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
|
|
cd "${TOP}"
|
|
## Register all support components
|
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
|
ISTTOKrpi_registerRecordDeviceDriver pdbbase
|
|
## Load I2C drivers
|
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
|
|
## Load record instances
|
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
|
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
|
dbLoadRecords("db/ISTTOKpcf8591.db","P=ISTTOK:,R=central:")
|
dbLoadRecords("db/ISTTOKtda8444.db","P=ISTTOK:,R=central:")
|
dbLoadRecords("db/ISTTOKmachineControl.db","P=ISTTOK:,R=central:")
|
|
## Load Serial drivers
|
drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
|
#drvAsynSerialPortConfigure("RS0","/dev/ttyAMA0")
|
|
asynSetOption("RS0", 0, "baud", "9600")
|
asynSetOption("RS0", 0, "bits", "8")
|
asynSetOption("RS0", 0, "parity", "none")
|
asynSetOption("RS0", 0, "stop", "1")
|
asynSetOption("RS0", 0, "clocal", "Y")
|
asynSetOption("RS0", 0, "crtscts", "N")
|
|
dbLoadRecords("db/ISTTOKpfeiffer.db","P=ISTTOK:,R=central:,bus=RS0")
|
|
# connect to the MAIL server mail.ipfn.tecnico.ulisboa.pt
|
# ,priority,noAutoConnect,noProcessEos
|
drvAsynIPPortConfigure("L0","193.136.136.3:25",0,1,0)
|
|
dbLoadRecords("db/sendmail.db", "P=ISTTOK:,PORT=L0,R=central:,L=0,A=0")
|
|
# Uncomment to Debug STREAM serial activity
|
#var streamError 1
|
#var streamDebug 1
|
#streamSetLogfile("logfile.txt")
|
|
## Run this to trace the stages of iocInit
|
#traceIocInit
|
|
#save_restoreSet_status_prefix("$(IOC):")
|
save_restoreSet_status_prefix("ISTTOK:")
|
set_requestfile_path("$(SAVE_DIR)")
|
set_savefile_path("$(SAVE_DIR)/save")
|
save_restoreSet_NumSeqFiles(3)
|
save_restoreSet_SeqPeriodInSeconds(600)
|
set_pass0_restoreFile("$(IOC).sav")
|
set_pass1_restoreFile("$(IOC).sav")
|
dbLoadRecords("$(AUTOSAVE)/asApp/Db/save_restoreStatus.db", "P=ISTTOK:")
|
|
cd "${TOP}/iocBoot/${IOC}"
|
|
asSetFilename("${TOP}/iocBoot/${IOC}/access_security.acf")
|
|
iocInit
|
|
#asInit
|
|
# Create request file and start periodic 'save’
|
# makeAutosaveFileFromDbInfo("$(SAVE_DIR)/$(IOC).req", "autosaveFields")
|
create_monitor_set("$(IOC).req", 30)
|
|
## Start any sequence programs , use safe mode
|
seq IsttokSeqExec
|
