Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 37487,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Pulse Sequence entry
sevr=info Pulse Sequence entry
sevr=info Pulse Sequence entry
sevr=info Stopping Mode: NonStopping
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0x1f38430: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> save_restore: Can't connect to all status PV(s)
Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 34983,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Stopping Mode: NonStopping
sevr=info Cleaning Mode: NonCleaning
sevr=info Cleaning Mode: NonCleaning
sevr=info Cleaning Mode: NonCleaning
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0xdc94f8: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> save_restore: Can't connect to all status PV(s)
Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 35941,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Stopping Mode: NonStopping
sevr=info Pulse Sequence entry
sevr=info Pulse Sequence entry
sevr=info Cleaning Mode: NonCleaning
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0xafd3d8: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> save_restore: Can't connect to all status PV(s)
Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 41945,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Starting Mode: NonStarting
sevr=info Starting Mode: Starting1
sevr=info Stopping Mode: NonStopping
sevr=info Stopping Mode: Stopping1
sevr=info Cleaning Mode: NonCleaning
sevr=info Cleaning Mode: Cleaning1 In
sevr=info Shoting Mode: NonShoting
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0x7803b8: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> sevr=info Stopping Mode: NonStopping
sevr=info Starting Mode: NonStarting
sevr=info Stopping Mode: NonStopping
sevr=info Starting Mode: NonStarting
save_restore: Can't connect to all status PV(s)
Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 39343,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Pulse Sequence entrysevr=info Cleaning Mode: NonCleaning
sevr=info Cleaning Mode: NonCleaning
sevr=info Shoting Mode: NonShoting
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0x1e73478: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> save_restore: Can't connect to all status PV(s)
Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 44303,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Starting Mode: NonStarting
sevr=info Starting Mode: Starting1
sevr=info Stopping Mode: NonStopping
sevr=info Stopping Mode: NonStopping
sevr=info Cleaning Mode: NonCleaning
sevr=info Cleaning Mode: Cleaning1 In
sevr=info Shoting Mode: NonShoting
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0x1f704e0: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> sevr=info Stopping Mode: NonStopping
sevr=info Stopping Mode: NonStopping
sevr=info Stopping Mode: NonStopping
sevr=info Stopping Mode: NonStopping
save_restore: Can't connect to all status PV(s)
Starting iocInit
reboot_restore: entry for file 'iocISTTOKrpi.sav'
reboot_restore: Found filename 'iocISTTOKrpi.sav' in restoreFileList.
*** restoring from '/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.sav' at initHookState 7 (after record/device init) ***
reboot_restore: done with file 'iocISTTOKrpi.sav'

cas warning: Configured TCP port was unavailable.
cas warning: Using dynamically assigned TCP port 41859,
cas warning: but now two or more servers share the same UDP port.
cas warning: Depending on your IP kernel this server may not be
cas warning: reachable with UDP unicast (a host's IP in EPICS_CA_ADDR_LIST)
iocRun: All initialization complete
sevr=info Pulse Sequence entry
sevr=info Pulse Sequence entry
sevr=info Stopping Mode: NonStopping
sevr=info Cleaning Mode: NonCleaning
sevr=info Shoting Mode: NonShoting
#!../../bin/linux-arm/ISTTOKrpi
## You may have to change ISTTOKrpi to something else
## everywhere it appears in this file
< envPaths
epicsEnvSet("IOC","iocISTTOKrpi")
epicsEnvSet("TOP","/opt/epics/iocs/ISTTOKrpi")
epicsEnvSet("SUPPORT","/usr/local/epics/base/../synApps_5_8/support")
epicsEnvSet("SNCSEQ","/usr/local/epics/base/../synApps_5_8/support/seq-2-2-1")
epicsEnvSet("ASYN","/usr/local/epics/base/../synApps_5_8/support/asyn-4-26")
epicsEnvSet("STREAM","/usr/local/epics/base/../synApps_5_8/support/stream-2-6a")
epicsEnvSet("AUTOSAVE","/usr/local/epics/base/../synApps_5_8/support/autosave-5-6-1")
epicsEnvSet("DRVASYNI2C","/usr/local/epics/base/../modules/drvAsynI2C")
epicsEnvSet("EPICS_BASE","/usr/local/epics/base")
epicsEnvSet( "STREAM_PROTOCOL_PATH", "/opt/epics/iocs/ISTTOKrpi/protocols" )
epicsEnvSet( "SAVE_DIR", "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi" )
epicsEnvSet( "EPICS_CA_ADDR_LIST", "localhost 192.168.1.152")
cd "/opt/epics/iocs/ISTTOKrpi"
## Register all support components
dbLoadDatabase "dbd/ISTTOKrpi.dbd"
ISTTOKrpi_registerRecordDeviceDriver pdbbase
## Load  I2C drivers
drvAsynI2CConfigure( "I2C", "/dev/i2c-1", 1 )
## Load Serial drivers
#drvAsynSerialPortConfigure("RS0","/dev/ttyUSB0")
#asynSetOption("RS0", 0, "baud", "9600")
#asynSetOption("RS0", 0, "bits", "8")
#asynSetOption("RS0", 0, "parity", "none")
#asynSetOption("RS0", 0, "stop", "1")
#asynSetOption("RS0", 0, "clocal", "Y")
#asynSetOption("RS0", 0, "crtscts", "N")
## Load record instances
dbLoadRecords("db/ISTTOKstates.db","P=ISTTOK:,R=central:")
dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:")
#dbLoadRecords("db/ISTTOKpcf8574.db","P=ISTTOK:,R=central:,ID=57")
dbLoadRecords("db/ISTTOKvacummPumps.db","P=ISTTOK:,R=central:")
## Run this to trace the stages of iocInit
#traceIocInit
save_restoreSet_status_prefix("iocISTTOKrpi:")
set_requestfile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
set_savefile_path("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi")
save_restoreSet_NumSeqFiles(3)
save_restoreSet_SeqPeriodInSeconds(600)
set_pass1_restoreFile("iocISTTOKrpi.sav")
cd "/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi"
asSetFilename("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/access_security.acf")
iocInit
############################################################################
## EPICS R3.15.5
## EPICS Base built Jan 11 2018
############################################################################
#asInit
# Create request file and start periodic 'save’
makeAutosaveFileFromDbInfo("/opt/epics/iocs/ISTTOKrpi/iocBoot/iocISTTOKrpi/iocISTTOKrpi.req", "autosaveFields")
create_monitor_set("iocISTTOKrpi.req", 30)
## Start any sequence programs
seq IsttokSeqExec, "unit=ISTTOK"
Sequencer release 2.2.1, compiled Thu Jan 11 18:42:15 2018
Spawning sequencer program "IsttokSeqExec", thread 0x9df470: "IsttokSeqExec"
IsttokSeqExec[0]: all channels connected & received 1st monitor
epics> save_restore: Can't connect to all status PV(s)