Imported IOC APP from SVN

epics/iocs/dsPICtemperature/configure/CONFIG

@@ -0,0 +1,29 @@
+# CONFIG - Load build configuration data
+#
+# Do not make changes to this file!
+
+# Allow user to override where the build rules come from
+RULES = $(EPICS_BASE)
+
+# RELEASE files point to other application tops
+include $(TOP)/configure/RELEASE
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+-include $(TOP)/configure/RELEASE.Common.$(T_A)
+-include $(TOP)/configure/RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+
+CONFIG = $(RULES)/configure
+include $(CONFIG)/CONFIG
+
+# Override the Base definition:
+INSTALL_LOCATION = $(TOP)
+
+# CONFIG_SITE files contain other build configuration settings
+include $(TOP)/configure/CONFIG_SITE
+-include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+ifdef T_A
+ -include $(TOP)/configure/CONFIG_SITE.Common.$(T_A)
+ -include $(TOP)/configure/CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+endif
+

epics/iocs/dsPICtemperature/configure/CONFIG_SITE

@@ -0,0 +1,34 @@
+# CONFIG_SITE
+
+# Make any application-specific changes to the EPICS build
+#   configuration variables in this file.
+#
+# Host/target specific settings can be specified in files named
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).Common
+#   CONFIG_SITE.Common.$(T_A)
+#   CONFIG_SITE.$(EPICS_HOST_ARCH).$(T_A)
+
+# CHECK_RELEASE controls the consistency checking of the support
+#   applications pointed to by the RELEASE* files.
+# Normally CHECK_RELEASE should be set to YES.
+# Set CHECK_RELEASE to NO to disable checking completely.
+# Set CHECK_RELEASE to WARN to perform consistency checking but
+#   continue building anyway if conflicts are found.
+CHECK_RELEASE = YES
+
+# Set this when you only want to compile this application
+#   for a subset of the cross-compiled target architectures
+#   that Base is built for.
+#CROSS_COMPILER_TARGET_ARCHS = vxWorks-68040
+
+# To install files into a location other than $(TOP) define
+#   INSTALL_LOCATION here.
+#INSTALL_LOCATION=</path/name/to/install/top>
+#INSTALL_LOCATION=/opt/epics/apps/ISTTOK
+
+# Set this when your IOC and the host use different paths
+#   to access the application. This will be needed to boot
+#   from a Microsoft FTP server or with some NFS mounts.
+# You must rebuild in the iocBoot directory for this to
+#   take effect.
+#IOCS_APPL_TOP = </IOC/path/to/application/top>

epics/iocs/dsPICtemperature/configure/Makefile

@@ -0,0 +1,8 @@
+TOP=..
+
+include $(TOP)/configure/CONFIG
+
+TARGETS = $(CONFIG_TARGETS)
+CONFIGS += $(subst ../,,$(wildcard $(CONFIG_INSTALLS)))
+
+include $(TOP)/configure/RULES

epics/iocs/dsPICtemperature/configure/RELEASE

@@ -0,0 +1,45 @@
+# RELEASE - Location of external support modules
+#
+# IF YOU MAKE ANY CHANGES to this file you must subsequently
+# do a "gnumake rebuild" in this application's top level
+# directory.
+#
+# The build process does not check dependencies against files
+# that are outside this application, thus you should do a
+# "gnumake rebuild" in the top level directory after EPICS_BASE
+# or any other external module pointed to below is rebuilt.
+#
+# Host- or target-specific settings can be given in files named
+#  RELEASE.$(EPICS_HOST_ARCH).Common
+#  RELEASE.Common.$(T_A)
+#  RELEASE.$(EPICS_HOST_ARCH).$(T_A)
+#
+# This file should ONLY define paths to other support modules,
+# or include statements that pull in similar RELEASE files.
+# Build settings that are NOT module paths should appear in a
+# CONFIG_SITE file.
+# If you don't want to install files into $(TOP) then define
+# INSTALL_LOCATION_APP here:
+#INSTALL_LOCATION_APP=/opt/epics/apps
+
+TEMPLATE_TOP=$(EPICS_BASE)/templates/makeBaseApp/top
+
+#AUTOSAVE=${EPICS_MODULES}/autosave
+ASYN=/opt/epics/modules/asyn
+#${EPICS_MODULES}/asyn
+SNCSEQ=/opt/epics/modules/sncseq
+#${EPICS_MODULES}/sncseq
+
+#IOCMON=${EPICS_MODULES}/iocmon
+#SYSMON=${EPICS_MODULES}/sysmon
+
+#STD=${EPICS_MODULES}/std
+
+# EPICS_BASE usually appears last so other apps can override stuff:
+#EPICS_BASE=/opt/epics/base/
+EPICS_BASE=/opt/epics/base-3.14.12.3/
+#/opt/codac-3.1/epics/base
+
+# Set RULES here if you want to take build rules from somewhere
+# other than EPICS_BASE:
+#RULES=/path/to/epics/support/module/rules/x-y

epics/iocs/dsPICtemperature/configure/RULES

@@ -0,0 +1,6 @@
+# RULES
+
+include $(CONFIG)/RULES
+
+# Library should be rebuilt because LIBOBJS may have changed.
+$(LIBNAME): ../Makefile

epics/iocs/dsPICtemperature/configure/RULES.ioc

@@ -0,0 +1,2 @@
+#RULES.ioc
+include $(CONFIG)/RULES.ioc

epics/iocs/dsPICtemperature/configure/RULES_DIRS

@@ -0,0 +1,2 @@
+#RULES_DIRS
+include $(CONFIG)/RULES_DIRS

epics/iocs/dsPICtemperature/configure/RULES_TOP

@@ -0,0 +1,3 @@
+#RULES_TOP
+include $(CONFIG)/RULES_TOP
+