added autosave for alarm limits

epics/iocs/ISTTOKrpi2/ISTTOKrpi2App/src/Makefile

@@ -20,10 +20,12 @@ ISTTOKrpi2_DBD += base.dbd
 ISTTOKrpi2_DBD += asyn.dbd
 ISTTOKrpi2_DBD += stream.dbd
 ISTTOKrpi2_DBD += drvAsynSerialPort.dbd
+ISTTOKrpi2_DBD += asSupport.dbd
 
 # Add all the support libraries needed by this IOC
 ISTTOKrpi2_LIBS += asyn
 ISTTOKrpi2_LIBS += stream
+ISTTOKrpi2_LIBS += autosave
 
 # ISTTOKrpi2_registerRecordDeviceDriver.cpp derives from ISTTOKrpi2.dbd
 ISTTOKrpi2_SRCS += ISTTOKrpi2_registerRecordDeviceDriver.cpp

epics/iocs/ISTTOKrpi2/iocBoot/iocISTTOKrpi2/envPaths

@@ -0,0 +1,7 @@
+epicsEnvSet("IOC","iocISTTOKrpi2")
+epicsEnvSet("TOP","/home/pi/ISTTOK/epics/iocs/ISTTOKrpi2")
+epicsEnvSet("EPICS_BASE","/home/pi/Apps/epics7/epics-base")
+epicsEnvSet("HOME","/home/pi")
+epicsEnvSet("SUPPORT","/home/pi/Apps/epics7/support")
+epicsEnvSet("ASYN","/home/pi/Apps/epics7/support/asyn")
+epicsEnvSet("STREAM","/home/pi/Apps/epics7/support/StreamDevice")

epics/iocs/ISTTOKrpi2/iocBoot/iocISTTOKrpi2/iocISTTOKrpi2.req

@@ -0,0 +1,4 @@
+#ALARM Limits
+ISTTOK:vacuum:RPump1-Pressure.HIGH
+ISTTOK:vacuum:RPump1-Pressure.HIHI
+

epics/iocs/ISTTOKrpi2/iocBoot/iocISTTOKrpi2/st.cmd

@@ -5,6 +5,7 @@
 
 < envPaths
 epicsEnvSet( "STREAM_PROTOCOL_PATH", "$(TOP)/db" )
+epicsEnvSet( "SAVE_DIR", "$(TOP)/iocBoot/$(IOC)" )
 
 cd "${TOP}"
 
@@ -31,8 +32,22 @@ dbLoadRecords("db/ISTTOKpfeiffer.db","P=ISTTOK:,R=vacuum:,bus=RS0")
 #var streamDebug 1
 #streamSetLogfile("stream_logfile.txt")
 
+#save_restoreSet_status_prefix("$(IOC):")
+save_restoreSet_status_prefix("ISTTOK:")
+set_requestfile_path("$(SAVE_DIR)")
+set_savefile_path("$(SAVE_DIR)/save")
+save_restoreSet_NumSeqFiles(3)
+save_restoreSet_SeqPeriodInSeconds(600)
+set_pass0_restoreFile("$(IOC).sav")
+set_pass1_restoreFile("$(IOC).sav")
+#dbLoadRecords("$(AUTOSAVE)/asApp/Db/save_restoreStatus.db", "P=ISTTOK:")
+ 
 cd "${TOP}/iocBoot/${IOC}"
 iocInit
 
+# Create request file and start periodic 'save’
+# makeAutosaveFileFromDbInfo("$(SAVE_DIR)/$(IOC).req", "autosaveFields")
+create_monitor_set("$(IOC).req", 30)
+
 ## Start any sequence programs
 #seq sncxxx,"user=pi"

epics/iocs/RELEASE.local

@@ -8,7 +8,7 @@ STREAM=$(SUPPORT)/StreamDevice
 #CALC=$(SUPPORT)/calc
 AUTOSAVE = $(SUPPORT)/autosave
 DRVASYNI2C =$(SUPPORT)/drvAsynI2C
-SNCSEQ=$(SUPPORT)/seq-2-2
+#SNCSEQ=$(SUPPORT)/seq-2-2
 
 #  IPAC release V2-7 or later is required.
 #IPAC=